产品中心
Products Center
压电纳米平台
    
减震隔振平台
    
一维纳米台   二维纳米台   三维纳米台   控制器   手动台   混合式   定制化   配件  
产品名称:Z-INSERT
The beauty of the Z-INSERT resides in the fact that it fits every standard 160mm x 110mm opening (K-type frame). Those type of opening are used on most motorized stages provided by third party manufacturers. The Z-INSERT’s 128.5 mm by 86.5 mm opening suits every multi-well microplates with an SBS Standard 127.5 x 85 mm footprint (5″ x 3 1/3”) (e.g. 96-well microplate).
详细介绍

 Features :

Travel range up to 500 µm
Low profile for easy integration
Closed loop control
Silicon sensor technology
Less than 50pm noise floor
 
Applications :
Z-stack
Autofocus system
Confocal microscopy
Super resolution microscopy
Biotechnology
 
Specifications  
           
  Z-INSERT.100 Z-INSERT.200 Z-INSERT.300 Z-INSERT.500 Unit
Range of motion Z 100 200 300 500 µm
Resolution Z 0.1 0.2 0.3 0.5 nm
Typical noise floor Z 0.01 0.02 0.03 0.05 nm
Full range repeatability Z 0.2 0.4 0.6 1 nm
Linearization Z 0.02% 0.02% 0.02% 0.02% (typical)
Resonant frequency Z 500 400 350 250 Hz
Stiffness Z 0.6 0.5 0.4 0.25 N/µm
Maximum Load* :          
- horizontal use 1 kg
- vertical use 0.5 kg
Sensor Silicon HR sensor  
Size W x L x H 220.5 x 148 x 27.2 mm
Material Al  
Cable length** 2 m
Controller Standard  

 

*Higher load on request

*Higher length on request

关于我们
公司简介
企业文化
合作伙伴
产品中心
压电纳米平台
减震隔振平台
新闻动态
企业新闻
行业新闻
技术文档
产品问答
应用案例
除振设备
特制电机和运动模组
高频切割设备
运动平台模组
光干涉仪和测距仪
公司:捷动精密(深圳)有限公司
地址:深圳市龙岗区坂田街道坂雪岗大道金都商务大厦411室
电话:0755-29611173
传真:0755-29611173
版权所有 © 2014-2020  捷动精密(深圳)有限公司    ICP备案: 粤ICP备20028886
技术支持:众智达网络