产品中心
Products Center
压电纳米平台
    
减震隔振平台
    
一维纳米台   二维纳米台   三维纳米台   控制器   手动台   混合式   定制化   配件  
产品名称:LT3
The LT 3 is a 3-axis ultra-low profile nanopositioner primarily designed to be integrated in any kind of inverted microscope. This piezostage can be combined with a coarse positioning Microstage (See our Hybrid System). The standard LT3 is made in aluminium but for Bruker AFM upgrade, the LT3.100 (100μm version) is available in Invar, which allows higher thermal stability.
详细介绍

 Features :

Low profile
Square aperture (66 x 66 mm)
100, 200 or 300 µm motion
Closed loop control
Silicon sensor technology
Less than 30pm noise floor
 
Applications :
Super Resolution microscopy
Nanolithography
Particle tracking
Confocal microscopy
Atomic Force Microscopy
Bruker AFM upgrade
 
Specifications  
         
  LT3.100 LT3.200 LT3.300 Unit
Range of motion 100 200 300 µm
Resolution 0.1 0.2 0.3 nm
Typical noise floor 0.01 0.02 0.03 nm
Full range repeatability 0.2 0.4 0.6 nm
Linearization 0.02% 0.02% 0.02% (typical)
Resonant frequency X/Y/Z 500/400/400 400/350/300 300/250/250 Hz
Stiffness X/Y/Z 0.6/0.5/0.5 0.5/0.4/0.4 0.4/0.3/0.3 N/µm
Maximum Load* :        
- horizontal use 1 kg
- vertical use 0.5 kg
Sensor Silicon HR sensor  
Size W x L x H 193 x 152.5 x 20.7 mm
Material Al or Invar Al Al  
Cable length** 2 m
Controller Standard  

 

*Higher load on request

**Higher length on request

关于我们
公司简介
企业文化
合作伙伴
产品中心
压电纳米平台
减震隔振平台
新闻动态
企业新闻
行业新闻
技术文档
产品问答
应用案例
除振设备
特制电机和运动模组
高频切割设备
运动平台模组
光干涉仪和测距仪
公司:捷动精密(深圳)有限公司
地址:深圳市龙岗区坂田街道坂雪岗大道金都商务大厦411室
电话:0755-29611173
传真:0755-29611173
版权所有 © 2014-2020  捷动精密(深圳)有限公司    ICP备案: 粤ICP备20028886
技术支持:众智达网络