At very low extra cost, we can customize most of our products to give the best solution for your application.

For example, it is possible to change the range of motion of one or more axis and/or change dimensions of the central aperture. Indeed, we can provide nanopositioning stage with 10 to 500 microns range of motion on X, Y, Z. For the central aperture, all dimensions (up to 160X110mm) are possible

To start with, we will ask information regarding your exact requirements such as :

– Number of axis

– Travel range on each axis

– Size of the aperture

– Space restriction

– Speed requirement (type of signal, frequency)

– Mass of the sample to be moved

– Environment (vacuum, humidity, temperature, magnetic field, etc, )

– USB interface or analogue controller needed (OEM electronics are also available)

In a second step, based on  this information, we will design your system by using Finite Element Analysis (FEA) method in order to find the best compromise to match your needs.

Finally, we will send you the specifications of the customized product, an image and a drawing.

For large quantity OEM, we generally send a prototype stage in order to validate the design which we offer.

EXAMPLE OF OEM CUSTOMIZED PRODUCTS

Z-axis stage inserts

• Up to 500μm ranges of motion
• Customized dimensions and mounting (insert are possible)
• Custom aperture sizes
• Higher resolution and lower cost than competition
• Custom sample holders

Objective lens nanopositioners

• Higher ranges of motion
• FEA designed to produce exceptionally low off-axis error

Long range, multi-axis nanopositioners for microscopy

• Ranges of motion up to 500μm
• Super large aperture (105mmX105mm possible)
• High resolution
• Low height stages for convenient sample placement
• Customized dimensions and mounting hole

If you have any questions for us about custom products please contact us.